13
Set up your Desktop Controller
How do I choose a Master?
If you have more than one Roomplayer, choose the one
least likely to be switched off. If your Master is switched off,
the other Roomplayers will not operate until it is switched
back on or a new Master is nominated. You will need to
re-index your music libraries if you select a new Master.
You must select a Master, even if you only have one
Roomplayer.
It is responsible for indexing all your music and
takes control of any additional Roomplayers you own. Make
sure one Roomplayer is ticked before clicking
next
.
How long does a Roomplayer take to start up?
The red LED goes out when your Roomplayer has
connected to your network. It takes approx. 1 minute.
The system will automatically detect any Roomplayers that
are on your network and switched on. This may take several
minutes. If no Roomplayers are detected a message will
appear on your computer screen to tell you. This will also be
displayed when connected Roomplayers are switched off.
Step 2
Choose a Master
The Wizard will help you set up your Roomplayer/s, create
users and find music libraries. It will appear during the
installation of your Desktop Controller and will guide you
through the process step by step. Don’t worry if you don’t get
everything right first time, you can always change your
settings from the
System
menu.
Step 1
Configure your system using the wizard
Use the wizard to setup your system, discover
music libraries and more.
