8
Option A
Connect
Roomplayer I
to your
loudspeakers and any audio inputs or
outputs.
Connect your loudspeakers using the bare wire terminals
or 4.0mm plugs. To get the best performance, make
sure you connect the red (+) and black (-) terminals from
each loudspeaker to the corresponding terminals on your
Roomplayer. If you incorrectly connect the loudspeakers, no
damage will be done but bass performance will be poor.
It’s easy to get your first Roomplayer up and running.
Follow the instructions in Steps 1, 2 and 3.
Set up your first Roomplayer
How to connect banana plugs
Using a jewelllers screwdriver, remove the central blanking
section of the insulation cover.
Step 1
Connect your Roomplayer to any
audio inputs or outputs.
If you have
Roomplayer I
(with a built-in amplifier) follow the
instructions in
Option A
.
If you have
Roomplayer II
(without
an amplifier), follow the instructions in
Option B
. Do not
apply power until you have completed step 2.
loudspeakers
subwoofer
television
How to connect bare wire terminals
If you are using bare wire terminals, push the spring-loaded
speaker connectors on the Roomplayer inward to reveal
the connection hole, insert the speaker wire
into the hole, then release.
