Simple e SCOOTER 1, Manual

GENERAL USAGE NOTES 

Break usage and maintenance: Your E-SCOOTER will last longer and work better 

when the breakes are used properly. Brake control cables, chains and axle nuts may 

get loose when a new E-SCOOTER is first used and may require an adjustment. We 

suggest that the brakes and axle nuts be checked every 30 days and adjusted if 

necessary. 

The E-SCOOTER scooter can be use without pedals but pedaling the E-SCOOTER 

upon starting will save battery life and will make it easier to balance. The E-SCOOTER 

can also be pedaled in situation where the battery power is too low due to a failure to 

charge or exceeding its distance range. Turning the throttle all the way up and riding 

the scooter all the time on a full throttle will also reduce the range and the battery life. 

We suggest you to start smoothly and turn the throttle 1/4 turn down when you have 

built a momentum. 

lt is a good idea to keep a tool kit with you when you ride. You should also carry 2 

spare inner tubes that fit the wheel and tire size as well as a manual air pump (with 

gauge) to re-inflate the tire if you have a flat tire or it becomes deflated during use. 

!WARNING

 A CRASH OR OTHER IMPACT CAN PUT EXTRAORDINARY STRESS ON 

COMPONENTS, CAUSING THEM TO FATIGUE PREMATURELY. COMPONENTS 

SUFFERING FROM PREVIOUS IMPACTS CAN FAIL SUDDENLY AND 

CATASTROPHICALLY, CAUSING LOSS OF CONTROL, SERIOUS INJURY OR DEATH. 

First, check yourself for injuries, and take care of others involved. 

Seek medical help if necessary. Next, if your E-SCOOTER is damaged, perform the 

checks described in this manual. lf you are unable to fix any damage/problems, or if 

you find any bent, scored, or discolored parts, please coll your local SCOOTER 

workshop. 

!WARNING

 IF YOU HAVE ANY DOUBT ABOUT THE CONDITION OF THE SCOOTER 

OR ANY OF ITS PARTS, DON’ T USE IT . CALL YOUR E-SCOOTER WORKSHOP. 

lf your E-SCOOTER is involved in a crash: 

1 1