TROUBLESHOOTING
Problem
Condition
Check
Solution
When I turn my
vehicle on
nothing
happens.
The throttle
does not work
or switch on,
the vehicle
moves without
acceleration.
The range is
low.
The breaks
are not
working
properly.
1. Break levers
go too deep.
2. No breaking
power.
1. Needs adjustment.
2. Break pads are dirty
and need replacement.
1. Adjust the break cable -
see instructions.
2. Clean break pads using
sand paper or replace .
Charger light is
off.
Battery doesn't
hold the
charge.
1. The throttle
does not return
to stop position.
1. No light
indications on
the display.
2. Power
indication
light is on.
3. Check battery and
motor connection.
3. Power
Indication
light is on
and the break
light is on.
4. Check the break
levers if they return to
normal position.
1 Check the grip for
damage.
2 Check the throttle
spring.
3. Throttle handle if it
is loose.
1. Bad connection
between the charger and
the battery.
2. Charger doesn't charge.
1. Connections between
the batteries are not good
2. Bad battery cell
1. Check all connections
between the batteries.
2. Replace the bad battery
cell.
1. Check the charger plug
position.
2. Replace the charger.
5. Battery voltage is
below 42 volts.
6. Charge or replace battery.
Contact the supplier.
1. Use a flat head screwdriver
to adjust the gap between
the rubber handle and the
cover.
2. Readjust the throttle
spring position. Contact the
supplier.
3. Check throttle
connections. Contact the
supplier.
3. Clean and fasten battery
terminal connectors.
4. Fasten the motor
connections with the
controller under seat
5. Loosen the break. If there
is any corrosion replace.
Contact the supplier.
1. Check the main power
switch under the seat if it
is on "ON" position.
2. Check power
connection and battery
level.
1. Flip the main power
switch on "ON"
2. Fasten connections.
1 6
Summary of Contents for e SCOOTER 1
Page 1: ...MANUAL 2018 SIMPLE e SCOOTER 1...
Page 20: ......
