2.6.
Installation based on an engine Shimano Steps E8000 and EP8:
Benötigtes Werkzeug:
•
2,5 mm Innensechskantschlüssel (Steps E8000)
•
Screwdriver (EP8)
Remove the engine cover screws (Figure 26 or 26.1). Now the engine cover can be removed. If necessary, pull the
plug of the speed sensor (Figure 27 or 27.1) using flat-nosed pliers.
Now connect the motor-side plug of the sIMPLEk (red and black cable) to the position of the previously unplugged
speed sensor. The speed sensor must then be connected to the connector of the sIMPLEk.
Shimano Steps E8000
picture 26
picture 27
Shimano EP8
picture 26.1
picture 27.1
Summary of Contents for Pro
Page 1: ...sIMPLEk Pro Tuningmodule operation manual info simplek de ...
Page 15: ......