3.2.
Calibrationmode
The calibration has to be carried out once and has to be shifted during standstill and with an inserted
rechargeable battery pack. On first start, the calibration will be automatically called up. It consists of two
sections. At first it will be grossly calibrated, then more precise.
In the first section of the calibration, an increased speed will be displayed on the speedometer. Remove
the sIMPLEk-Stick as closely as possible at 10.0
(mph). If you insert the stick again, precised calibration
will be start. You can see the speed on the speedometer which comes closer in small steps to 10.0
(mph) and can fall in the meantime repeatedly to 0.0
(mph). As soon as the 10.0
(mph) will be
displayed for the first time, again remove the sIMPLEk-Stick. Thus, the calibration is completed.
Carry out calibration again:
In order to start the calibration mode manually, plug in the sIMPLEk-Stick into
any active USB port for at least 5 seconds. The next time you plug in the sIMPLEk-Stick on the e-bike, the
calibration mode starts directly.
