3.
Handling
Der sIMPLEk-Stick includes 2 operation modes:
[1] tuning-mode
[2] calibration-mode
A change from Tuning Mode to Calibration Mode is made by plugging the sIMPLEk into any active USB
port for at least 5 seconds. The next time you plug in the sIMPLEk-Stick on the e-bike, the calibration mode
starts directly.
A calibration is necessary once, so that for each wheel circumference the actual speed in the tuning mode
is readable.
The tuning mode allows unlimited engine support (theoretically up to 100
(mph)).
