HomePlug AV Ethernet Adapter User’s Manual
13
6. Appendix A. Specifications
Protocols
&
Performance
Frequency band
2
～
28MHz.
PHY rate
200Mbps maximum.
Throughput
TCP stream: up to 65~70Mbps. UDP stream: up to 85~90Mbps
Modulation
OFDM support 1024/256/64/16/8 QAM, QPSK, BPSK, ROBO modulation schemes.
Encryption method
AES 128bit encryption with key management.
HomePlug® AV MAC:
TDMA and priority-based CSMA/CA channel access schemes maximize efficiency and
throughput.
Power
Requirement
Power rating
100 -240VAC , 50Hz/60Hz ; Tolerance: 50Hz +/- 3% 60Hz +/- 3.5%.
Power consumption
Full operation: 2.9W @ 100VAC , 3.8W @ 240VAC.
Idle mode: 2.2W @ 100VAC , 3.2W @ 240VAC (No Ethernet Activity).
Standby mode: 0.9W@ 100VAC, 1.8W @ 240VAC (Ethernet cable removed).
AC Power plug
Maximum current 16A @ 100-240VAC
Physical
interface
LAN Interface
One 10Base-T/100Base-TX port, Auto MDI/MDI-X detection
LAN Data transfer rate
10Mbps /100Mbps
Buttons
NMK— Encryption / Synchronization.
RST — Reset to factory default setting.
3 LED indicators
PWR— Power status.
LINK— Powerline Link status & throughput range indication.
ETH — Ethernet Activity status.
Flash
SDRAM
1MB Flash
8MB SDRAM
Connectivity: Maximum 8 PLC AV devices per HomePlug AV logical Network.
Max MAC addresses: 1024 NIC’s source-aware bridging capability.
TX Buffering: 160 ms of the Max Powerline devices disturbance that can be
withstood without packet loss.
Qos (Quality of Service)
Contention-free access, four-level priority based contention access and multi
segment bursting.
Tos, CoS and IP Port Number Packet Classifiers.
Supports IGMP managed multicast sessions.
IGMP
Enhanced IPv4/IGMPv1-3 snooping for multicast address and source specific
query.
Enhanced IPv6 and MLDv1-2 snooping for multicast address and source specific
query.
Firmware
HomePlug AV Firmware version: v4.1 ; upgradable
System Requirements
Microsoft Windows 98,SE,XP, 2000, Vista, Windows 7 for Powerline user utility
Software Utility
Power Packet Powerline user utility:
HomePlug device & MAC address indication.
DAK & NMK configuration for create a private powerline network.
Link information indication.
Firmware upgrade function.
Standards & Regulations
802.3 , 802.3u , HomePlug 1.1 co-existence.
Low Voltage Directive 2006/95/EEC.
EMC Directive 2004/108/EEC.
CE Class B.
RoHs Compliant.
Environment conditions
Operating temperature: 0
℃
to 40
℃
.
Storage temperature: -25
℃
to 70
℃
.
Dimensions
80mm (H) x66mm (W) x 37.5mm (D).
Packaging
1x White Box include 2x PLC adapters, 1x Manual CD, 2x 1.8m RJ-45 Cat.5 cable,
1x Printed Quick User Guide.
