Page 2
Preface
Thank you for purchasing Simple Technology products. The USB Series
card readers are designed to read and write CompactFlash and SmartMedia
cards when connected to IBM PC/AT-compatible computers equipped with
a USB port running Windows98 or later operating systems or Apple G3,
G4 and iMac computers. (Card compatibility will vary with the specific
card reader model.) To get the most from your card reader, carefully read
the instructions found in this manual before use.
Features:
♦
The card reader is equipped with a USB port (Universal Serial Bus),
the most advanced PC interface for peripherals.
♦
The card reader does not require any external power spply.
♦
The USB CompactFlash PhotoReader (Labeled Type I) is compatible
with Type I CompactFlash Cards.
♦
The USB CompactFlash PhotoReader (Labeled Type I & II) is compatible
with Type I & Type II CompactFlash Cards.
♦
The USB SmartMedia PhotoReader is compatible with SmartMedia
Cards
1. Changes may be made to this product or manual without notification.
2. This manual may not be copied in part, or in whole without express permission.
3. While Simple Technology aims to manufacture its readers to the highest standards, and make its readers compatible with the widest
variety of CompactFlash cards, and computer systems, some incompatibilities may arise. Depending on your system configuration,
USB compatibility may vary. Please look to our web site at http://www.simpletech.com.
MS-DOS and Microsoft Windows are trademarks of Microsoft Corporation.
IBM PC/AT is a trademark of IBM Corporation.
Apple, G3, G4 and iMac are trademarks of the Apple Computer Corporation.
