User Guide
Page 23
Line Access Cable
!
If the
SimpleJack
connector is not appropriate for your
application, you may use the optional line access cable (Simple
Part Number STI-FAX/CCBL). For purchasing information, call
1-800-4SIMPLE.
Refer to
Figures 3-4
and
3-5
and Proceed as follows:
1.
If you are using the
33.6 Communicator with SimpleJack:
attach
the line access cable to the connector on the left
)
.
Or,
If you are using the
33.6 Communicator
or the
14.4
Communicator
, attach the line access cable to the only
connector on the bottom of the card.
2. Attach a phone line to the wider, two-wire jack in the Line
Access Cable.
3. If you want to use the voice features and your computer does
not have a microphone and speaker, attach a handset to the
narrower, four-wire jack in the line access cable.
!
There is no industry standard for the signal polarity of handsets;
therefore, the handset jack does not work with all handsets.
Proceed to
Installing the Communications Software.
Figure 3-5.
33.6 Communicator with SimpleJack
Cable Connectors
0215
Connector for Optional Line
Access Cable and Optional
Cellphone Cable
0109
Connector for the PC Card
To Phone Line
To Handset
Figure 3-4.
The Line Access Cable Connectors
