Atlas | Operation and Installation Manual
4
I-A. Safety Information Symbols
The following images indicate important safety information:
This General warning symbol points out important information that, if not followed,
could endanger personal safety and/or property.
This Explosion warning symbol points out potential explosion hazards.
This Fire warning symbol points out potential fire hazards.
This Electrical warning symbol points out potential electrical shock hazards.
I-B. Warnings
This load bank is high-powered, technical, industrial equipment operating at dangerous
voltages and temperatures. It is capable of damaging itself, property or personnel if
improperly used. It is not a consumer product.
It must be installed, connected and operated by personnel properly trained and
experienced in its use. An operator’s manual is supplied with each load bank and
available online at www. simplexdirect.com. The operator must be familiar with its
contents and have access to it during operation.
•
High Voltage
: Turn off and disconnect power source before opening this
equipment.
•
High Temperature
: Allow hardware to cool before servicing or opening this
equipment.
•
Rotating Equipment:
Ensure that the fans have stopped before opening this
unit.
•
For Operator Safety:
Make sure this equipment is properly grounded when
in use.
All compression-type connections on fuse blocks, load blocks, and contactors should be
checked for tightness frequently. This check should be established as part of routine
maintenance.
The following cautions should be observed before and during operation:
•
Check intake and exhaust screens as well as fan and load elements for foreign
objects.
Warnings and Cautions -
