Instruction Manual
www.tksimplex.com
Hydraulic Chain Cutter – CCD0200
www.tksimplex.com
2
INDEX
1.
SAFETY REQUIREMENTS ........................................................................ 2
2.
TECHNICAL DATA .................................................................................... 3
3.
OPERATION ................................................................................................ 4
4.
MAINTENANCE .......................................................................................... 4
5.
ADDITIONAL INFORMATION ................................................................. 5
6.
ASSEMBLY DIAGRAMS AND PARTS LISTS ......................................... 6
1. SAFETY REQUIREMENTS
GENERAL CONSIDERATIONS
The SIMPLEX hydraulic cutters have been designed in accordance with our quality standards and ISO 9001 rules.
The tool is designed only for the operations described in this manual. The manufacturer is not responsible for any damage caused by
incorrect operation of the tool.
SAFETY PRINCIPLES
1.
This manual must be always available to the operator and all safety and operational instructions must be followed.
2.
The operator should be trained about the machine operation and the corresponding safety rules regarding prevention of
accidents and protection of the environment.
3.
The operator must wear personal protective equipment like helmet, glasses, gloves, boots, protective clothing, etc.
Helmet Glasses
Gloves
Boots
Protective Clothing
4.
The operator must be trained in the use and safe operation of the pump being used with the cutter. If a powered pump
(electric, air, engine driven, etc.) is being used, all personnel must be aware that the that the blade will advance
immediately when the system is pressurized and hydraulic flow is directed to the cutter.
5.
All personnel must keep fingers, hands and other body parts away from the cutter blade to prevent serious personal injury.
6.
Do not modify the tool in any way.
7.
Follow suggested maintenance operations periodically as recommended in this manual.
8.
All repairs should be performed by a qualified technician with genuine SIMPLEX parts. For further information, contact
your nearest SIMPLEX authorized service center.
9.
After operation, the tool should be cleaned and stored in a clean, dry and secure location.
GENERAL SAFETY INSTRUCTIONS
Before operation, make sure the operator is on solid footing in a well-lit area.
The cutter must be used in accordance with the relevant instructions described in the manual. The user must be
aware of the inherent risks when handling high pressure hydraulic devices and ensure that a safe working
environment and safe systems of work are in place before operating the equipment.
Before use, visually inspect the tool and accessories for any damage. If any damage is found, do not use the tool until
repaired. Ensure that all the components of the hydraulic system can support the maximum pressure.
