Instruction Manual
www.tksimplex.com
Hydraulic Cable Cutter – HCCD2375
www.tksimplex.com
3
•
Perform maintenance operations with all pressure relieved (0 psi/bar).
•
Do not exceed equipment ratings. Use gauges or appropriate indicator devices to be aware of the working pressure.
•
After operation, clean the tool and store it in a clean, dry and secure location.
•
When using a powered pump, make sure that the valve is set to the neutral position before connecting the tool.
•
Ensure that the pump reservoir is full. Always check oil level with cutter blade fully retracted.
•
Ensure that heavy or sharp objects are positioned away from the hoses.
•
When working with wire rope, fraying may occur during the cutting operation. To help prevent this, bind the wire rope on
both sides of the cutting blade with tape or wire.
2.
TECHNICAL DATA
MODEL
HCCD2375
CUTTING TOOL
Imperial
Metric
Capacity
43.8 Ton
390 kN
Pressure
10,150 psi
700 bar
Weight
54.1 lb
24.6 kg
Length
✝
18.9 in
480 mm
Width
✝
5.9 in
150 mm
Height
✝
5.5 in
140 mm
Max Jaw Opening
✝
2.5 in
64 mm
CUTTING CAPACITIES*
Wire Rope
Steel **
2.36 in
60 mm
Aluminum
2.36 in
60 mm
Cable
Telephone
2.36 in
60 mm
Lead
2.36 in
60 mm
Underground
2.36 in
60 mm
✝
Due to rounding, the dimensions contained in this chart may be slightly different than the
dimensions shown in the diagrams in Section 6.
*Maximum diameter material that can be cut.
**Individual steel wire not to exceed 0.079 in (2 mm).
Manufacturer’s rating is the maximum allowable limit. Good practice encourages using only 80% of
the manufacturer rating.
Keep the tool away from flames and heat, such as during welding.
