ASSEMBLY
11/20
MODEL # 3AXCRIDTVS-60W
STEP 3
STEP 4
1. Use Phillips Screwdriver to attach Handle 4 to Drawer Front L .
Repeat Step 1-4 for the second drawer.
1. Align Drawer Back N with Drawer Bottom O and press firmly into slot .
2. Attach Back N using 2 Allen Key Screws 1 through pre-drilled holes on each side ML , MR .
3. Use Allen Key 3 to tighten. Do not over tighten.
NOTE
: The screwdriver is not
included in the hardware pack.
L
4
1
3
L
O
N
M
R
M
L