Bring both ends together and slide the
smooth side upright
7
.
Check to make sure the strap is securely laced and locked to the
“locked” position.
through the
square-shaped end and pull through to create the
brackets.
●
DO NOT
place heavy objects in top drawers or on top shelves
●
DO NOT
let children climb or hang on drawers, doors or shelves
below the bracket mounted to the furniture.
2.
Determine where furniture is to be placed and mark location on
the wall for mounting bracket screw hole approximately 2 inches
hole and gently tap until the flange on the anchor is against the
wall surface.
4.
Position the bracket over the anchor and use the longer screw to
3.
Drill a 3/16 inch hole in the wall. Press the plastic anchor into the
1.
Attach one of the mounting brackets securely to the back edge of
securely attach the bracket to the wall.
5.
Place the furniture so the back edge is in line with the bracket on
the wall.
6.
Lace an end of the nylon
zip-tie strap
down through each bracket.
the furniture. Use the shorter screw.
Furniture Anti-Tipping Restraint Instructions
21
