/17
15
ASSEMBLY
MODEL # AXCBSACA03-WH
c
b
a
1. Determine the location for the unit on the wall. The Top A should be
approximately 1 ¼” above the top of the Wall Mount Bar J when mounted.
2. Place the Wall Mount Bar J at the predetermined height. Use a level to ensure
that it is straight. The flat side of Wall Mount Bar J should face outward away
from the wall. Hole (b) should align with your studs. Carefully mark the position of
each hole using the tip of the Phillips Screw 7 .
3. Install four Wall Anchors 10 to positions (a),(c) using a Phillips screwdriver.
Anchors are self-tapping and do not need pre-drilled holes.
4. Use your drill to create 1 hole 0.15” diameter x 2” deep at position (b) .
STEP-11 - Positioning
STEP-12 - Attach Wall Mount Bar to Wall
a
b
c
10
J
7
7
7
J
