Simplicity Freedom S10CV, Owner'S Manual

14

PRobleM solVInG GUIDe

PROBLEM

Vacuum won’t turn on

Vacuum won’t pick up or 

low suction

Dust escaping from 

vacuum

POSSIBLE REASON

•  Battery is fully discharged

• Needs service

• Vacuum bag full

• Broken belt

• Worn brushroll

•  Vacuum bag not installed 

properly

POSSIBLE SOLUTION

• Charge battery (page 6)

•  Take to Authorized  

Simplicity Retailer

• Install new bag (page 9)

•  Replace belt (page 12)

• Replace brushroll (page 12)

•  Install bag properly. 

Review bag installation 

(page 9)

Troubleshooting

Any other service should be performed by an Authorized Simplicity Vacuum Retailer.

To locate your nearest Authorized Retailer, visit our website at  

www.SimplicityVac.com or call 888-9-SIMPLY.

For Best Performance

• Keep your vacuum clean and in good operating condition.
•  Change the vacuum bag once a month or when the bag is 2/3 full to maximize  

cleaning performance.

•  Always use genuine vacuum bags and replacement parts. Use of other products may  

result in poor cleaning performance, potential vacuum cleaner damage and may void  
vacuum warranty. Genuine products are designed for maximum cleaning performance.

• Have your vacuum checked annually by your Authorized Simplicity Retailer.
• Store your vacuum carefully in a dry area.
• For optimum cleaning performance and safety, follow your owner’s manual instructions.

Key Replacement Parts

• Genuine HEPA Media Vacuum Bags: 

SLH-6

• Genuine Vacuum Belts: 

S10B-2

WARNING!  

To Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug the 
Charger from the Charge Pont and remove the Battery Before Servicing or Cleaning 
the Vacuum.

CAUTION! 

 To Reduce the Risk of Electric Shock, Do Not Handle Charger Plug or Appliance with 
Wet Hands.