How to Attach the Handle to the Vacuum Cleaner
The vacuum and the handle are packed separately�
1� Remove the handle screw and slide the handle into the slots on
top of the vacuum�
2� Line up the hole on the handle with the hole on top of the
vacuum and insert the screw� Make sure the screw is tightened
securely (Fig� 1)�
3� Turn the upper cord hook to the upright position and wind the
power cord around the cord hooks when storing the vacuum
cleaner (Fig� 2)�
How to Release the Power Cord
1� The upper cord hook has a quick-release� To release the cord,
rotate the hook downward (Fig� 2)�
2� Return the cord hook to the upright position before rewinding
the cord�
On/Off Pedal
1� To turn the vacuum on, push the power pedal on the right side of
the vacuum nozzle from the user’s perspective (Fig� 3)�
2� To turn the vacuum off, push the pedal again�
The handle can be set to one of three positions – upright,
middle or low�
1� To release the handle, step on the handle release pedal
on the left side of the vacuum nozzle from the user’s
perspective and pull back the handle (Fig� 1)�
2� Upright position – for storage or when cleaning tools are
used (Fig� 2)� The handle locks in this position�
3� Middle position – for normal cleaning (Fig� 3)�
4� Low position – for cleaning under furniture* (Fig� 4)�
Fig� 1
Fig� 4
Fig� 2
Fig� 3
Fig� 1
Fig� 2
Fig� 3
HOW TO ASSEMBLE AND OPERATE THE VACUUM
HOW TO ADJUST THE HANDLE
5
* Once in the middle position, step on the handle release pedal again and lower the
handle to the low position�
Summary of Contents for S20EZM
