SimpliFire SF-ALL40-BK, Service Manual

SimpliFire •  SF-ALL40-BK, SF-ALL48-BK, SF-ALL60-BK, SF-ALL84-BK Service Manual  •  2040-960  Rev. G  •  5/20

2

Stone/Media/Log Installation

1.   Remove Glass.  
2.   Arrange the stone/media/log along the inset window 

ledge at the front of the appliance.   

Note:  

Extra media are provided and may be  

           distributed based on consumer preference.   

           Not all media needs to be used.

Glass Replacement (Continued)

Installing Glass
3.   Install front panel. Locate the J-hooks on the back  

      side of the glass on the four rivnuts on the  

      appliance opening.  Engage the rivnuts.   

      See Figure 2.  
4.   Press down on top edge of glass to fully engage J- 

      hooks on the rivnuts.

Note:

  Make sure the glass is fully attached to the fire-

           box so that the control panel can work properly.  

Figure 2.  Glass Front Removal/Installation 

5.  Thread the two (2) ST3X8 screws into the threaded 

      holes on the glass panel.  Check the alignment of  

      the glass panel and securely tighten the screws. See  

      Figure 3.

Figure 3.  Secure Glass Front