3
SimpliFire • SF-ALLP50-BK, SF-ALLP60-BK, SF-ALLP72-BK Service Manual • 2044-960 Rev. C • 10/19
REMOVE TWO (2) SCREWS
ON EACH SIDE
Figure 5 Remove two (2) Screws on Each Side and Remove Panels
5. Using a flathead screwdriver, pry open the tabs as shown in Figure 6.
Pry the tabs upward at a 30 degree angle. During this step, take care not to
scratch or damage the glass panel behind the tabs.
FUELBED PLASTIC COVER
Figure 6 Remove Plastic Cover
6. Remove the fuelbed plastic cover that covers the
fuelbed LED light strips. See Figure 6.
4. Remove right and left side panels by removing two
(2) screws from each side. Remove panels.See Figure 5.
SIDE PANELS
