SimpliFire • SF-FORMAT36 Service Manual • 2042-961 • 9/21
2
3. Replacement Instructions
CAUTION! Risk of Cuts, Abrasions or Flying Debris.
Wear protective gloves and safety glasses during
installation and service. Sheet metal edges are sharp.
WARNING: If the information in these
instructions is not followed exactly
it may result in personal injury and/or
property damage.
Tools and Supplies Needed
Before beginning the installation be sure that the following
tools and building supplies are available.
Magnetic Phillips screwdriver
Needle nose pliers
Gloves
Safety glasses
Mantel Side Panels Replacement
3.1 Mantel Side Panel Removal:
Refer to Mantel Instructions for more detail.
1. Disconnect electrical service to the appliance. For
hardwired electrical installations, find and shut-off
service at the breaker. For installations that use a
corded plug, disconnect the cord from the receptacle.
2. Remove two (2) screws securing the side panels to
the top mantel. See Figure 1.
3. Remove two (2) thumb screws securing the mantel to
the appliance. See Figure 2.
4. Slide mantel top off of appliance.
5. Slide side panels up and away from bottom mantel
and wall. Unplug the LED wire connector from each
side panel. Discard the old side panels.
WARNING! Risk of Shock!
Always disconnect power before
disassembly or servicing.
Figure 1 Side Panel Screw Location
Figure 2 Thumb Screw Location
