3
SimpliFire • SF-FORMAT36 Service Manual • 2042-961 • 9/21
3.3 Mantel Removal and Install (For FM50 &
FM60 mantels)
Refer to the Mantel Installation Instructions in the
appliance manual for more detail.
Mantel Removal (with Side Panels)
1. Disconnect electrical service to the appliance. For
hardwired electrical installations, find and shut-off
service at the breaker. For installations that use a
corded plug, disconnect the cord from the receptacle.
2. Remove two (2) screws that secure the side panels
to the top mantel. See Figure 1.
3. Remove two (2) thumb screws, securing the top
mantel to the appliance. See Figure 2.
4. Slide top mantel off of appliance.
5. Slide side panels up and away from wall and bottom
mantel.
6. Unplug the LED wire connectors from each side
panel.
7. Remove two (2) screws from bottom of bottom
mantel, securing it to the appliance.
8. Slide bottom mantel forward slightly, and unplug wire
harness from appliance to mantel.
9. Slide bottom mantel off of appliance.
3.1 Mantel Side Panels Replacement
(continued)
Mantel Side Panel Installation:
1. Plug the LED wire connector from each side panel
into the connector on the bottom mantel.
2. Ensuring the side panels are flat against the wall,
slide each side panel into the bottom mantel.
3
. Replace the top mantel.
4. Secure side panels to top mantel with two (2) screws .
See Figure 1.
5. Replace the thumb screws, securing the top mantel to
the appliance. See Figure 2.
6
. Plug in the appliance power cord, or for hardwired
installations restore power at the breaker.
3.2 Mantel Removal and Install (For FM43
mantels)
Mantel Removal: (No Side Panels)
1. Disconnect electrical service to the appliance. For
hardwired electrical installations, find and shut-off
service at the breaker. For installations that use a
corded plug, disconnect the cord from the receptacle.
2. Remove two (2) thumb screws securing the mantel to
the appliance. See Figure 2.
3. Slide top mantel off of appliance.
4. Remove two (2) screws on the bottom mantel top
securing it to the appliance.
5. Slide bottom mantel forward slightly, and unplug wire
harness from appliance to mantel.
6
. Slide bottom mantel off of appliance.
Mantel Install: (No Side Panels)
Refer to the Mantel Installation Instructions in the
appliance manual for more detail.
1. Slide bottom mantel onto appliance.
2. Plug in wire harness from bottom mantel into appli-
ance.
3. Replace two (2) screws securing the bottom mantel to
the appliance.
4. Slide top mantel onto appliance.
5. Secure top mantel to appliance with two (2) thumb
screws. See Figure 2.
6
. Plug in the appliance power cord, or for hardwired
installations restore power at the breaker.
Mantel Install (with Side Panels)
1. Slide bottom mantel onto appliance.
2. Plug the LED wire connector from mantel to appli-
ance.
3
. Secure bottom mantel to appliance with two (2)
screws.
4. Plug each side panel into the LED wire connectors
on bottom mantel.
5. Slide each side panel into place on bottom mantel.
6. Slide top mantel onto appliance.
7. Secure side panels to top mantel with two (2) screws.
8. Secure top mantel to appliance with two (2) thumb
screws.
9. Plug in the appliance power cord, or for hardwired
installations restore power at the breaker.
