SimpliFire SF-INS25, Service Manual

7

SimpliFire •  SF-INS25, SF-INS30, SF-INS35 Service Manual  •  2042-960  •  3/21

Remote Receiver Replacement

1.  If necessary, place a drop cloth or other material on 

     the hearth or flooring to prevent scratching.  
2.  Remove front.  Refer to Front Replacement section 

     for details. 

3.  Remove glass.  Refer to Glass Replacement section 

     for details.
4.  Remove log/grate assembly.  Refer to Log/Grate 

     Assembly Replacement section for details.
5.  Remove screws holding the plastic diffuser 

     brackets and panel in place. See Figure 5.

6

. The remote receiver is positioned in the center of

     the appliance behind the

plastic diffuser panel.  Using 

     a pliers, compress each barbed clip while lifting the 

     remote receiver board evenly to disengage it from the 

     clip. See Figure 15.
7.  Disconnect the wiring harness from the top of the 

     receiver.  See Figure 15.

8.  Securely reconnect the wiring harness to the new 

     remote receiver. See Figure 15
9.  Carefully align the new remote receiver board to the 

     barbed clips and push in place. See Figure 15.
10. Re-install the plastic diffuser brackets and panel.
11. Re-install log/grate assembly.
12. Re-install glass.
13. Re-install front.

 (RECEIVER-ELECT)

Figure 15  Remote Receiver Replacement

BARBED CLIPS

BARBED CLIPS

WIRE

WIRE

CONNECTOR

CONNECTOR