SimpliFire SF-SC43-BK Owner'S Manual Download

Page: 17 / 21

SimpliFire • SF-SC43-BK, SF-SC-55-BK, SF-SC78-BK • 2041-980 • 1/19

A. Maintenance

WARNING! Risk of Shock!

Always remove power before

moving or servicing. Do not immerse appliance in water.

• Before cleaning or servicing, always turn off appli-

ance and remove power, by either unplugging from

the wall outlet or shutting off circuit breaker.

• Light accumulated dust may be removed from the ap-

pliance exterior with a soft cloth or vacuum cleaner.

• Wipe the exterior surfaces of the appliance occasion-

ally with a slightly damp micro fiber cloth using a so-

lution of mild detergent and water. Dry thoroughly

before operating the appliance.

CAUTION!

Do not allow water to run into the interior of

the appliance as this could create a fire or electric shock.

Always remove power before moving or servicing.

•

The fan motor is factory lubricated for life and will not

require further lubrication.

• Store appliance in a clean dry place when not in use.

WARNING! Risk of Fire!

To reduce risk of fire, do not

store or use gasoline or any other flammable vapors or

liquids in the vicinity of the appliance.

WARNING! Risk of Electrical Shock!

Any other servic-

ing needed must be performed by an authorized service

technician. Do not attempt to service the unit yourself.

B. Cleaning

Glass

ust particles can be removed by buffing lightly with a

clean dry cloth. Fingerprints and other marks can be

cleaned with a cloth dampened with a quality household

glass cleaner.

The glass should be completely dried with

a lint free cloth or paper towel. Do not use abrasive clean-

ers on glass surface. Do not spray liquids directly onto

any surface.

Metal Surface

ust particles can be removed by buffing lightly with a

clean dry cloth. A damp cloth can be used to clean paint-

ed surfaces. Do not use abrasive cleaners or chemical

household cleaners. Do not spray liquids directly on to

any surface.

MAINTENANCE

C. Servicing

Except for cleaning, an authorized service technician

should perform any other service.

WARNING! Risk of Electrical Shock!

Do Not Open! No

user serviceable parts inside. Always turn heater off and

disconnect power before performing maintenance, ser-

vice, or removal from the framed wall opening.

Vents

Use a vacuum cleaner to remove dirt and dust from heat-

er and vent areas.

Summary of Contents for SF-SC43-BK






















Search results

Summary of Contents for SF-SC43-BK

Reviews:

Related manuals for SF-SC43-BK

Brands by name

Popular brands

SimpliFire SF-SC43-BK, Owner'S Manual

Search results

Summary of Contents for SF-SC43-BK

Reviews:

Related manuals for SF-SC43-BK

Brands by name

Popular brands