3
SimpliFire • SF-SC43-BK, SF-SC55-BK, SF-SC78-BK Service Manual • 2041-960 Rev. B • 9/19
Heater Assembly Replacement
1. Remove Front and Trim Assembly, see Front
replacement instruction.
2. Remove Glass, see Glass replacement instruction.
3. Remove Spotlight LED, see Spotlight LED
replacement instructions.
4. Support Heater Assembly and remove 5 screws.
See figure 6.
5. Slowly lower Heater Assembly until cable connector
is accessible. See Figure 7.
6. Disconnect Heater Assembly cable connector. See
Figure 7.
7.
Connect replacement Heater Assembly. See Figure
7.
8. Re-install Heater Assembly into appliance, be
careful not to pinch any wires.
9. Re-Install 5 screws.
10. Re-install Spotlight LED.
11. Re-Install glass.
12. Re-Install Front and Trim Assembly.
Figure 6
Figure 7
Control Box Replacement
1. Remove Front, see Front replacement instruction.
2. Remove Glass, see Glass replacement instruction.
3. Remove Spot Light LED, see Spotlight LED
replacement instructions.
4.
Support the Control Box Assembly and remove 4
screws. See figure 8.
5.
Slowly lower Control Box Assembly until cable
connectors are accessible. See Figure 9.
6.
Disconnect Control Box Assembly and re-connect
new Control Box Assembly. See Figure 9.
7.
Re-install Control Box Assembly into appliance, be
careful not to pinch any wires.
8. Re-Install 4 screws.
9. Re-install Spotlight LED.
10. Re-Install glass.
11. Re-Install Front and Trim Assembly.
Figure 8
Figure 9
HEATER ASSEMBLY
CONNECTOR
= SCREWS
= SCREWS
