SimpliFire • SF-WM36, SF-WM58, SF-WM70, SF-WM94 Service Manual • 2040-908 Rev. D • 1/19
4
Figure 14 Fan Box Fasteners
5. Remove four screws that attach fan box to the bottom
of the appliance. As the screws are removed,
support the weight of the module. See Figure 14 and
15.
Figure 15 Support Fan Box while accessing Electrical
Connector
6. Locate and unplug the electrical connector on the
bottom of the appliance. See Figure 16.
Figure 16 Electrical Connector lower right of Appliance
Fan Box Installation
(Not applicable for SF-WM36)
1. Switch the main switch control on the right corner of
the appliance to the OFF position.
2. Unplug the power input cord from the wall receptacle.
3. Locate lighting LED wire harness connector on
bottom of Glass Front. Disconnect it from the
appliance. See Figure 12.
Figure 12 Lighting LED Connection
CAUTION! Glass Front is heavy. Handle with Care.
4. Remove Glass Front from appliance. Remove
two retaining screws that connect the mounting
brackets on the glass front to the top corners of
the appliance. Pull gently on the bottom of the glass
panel to disengage the plug connectors on the
bottom corners of the appliance. When the plug
connectors are disengaged, lift up on the glass front
to disengage the hanging brackets from the top
corners of the appliance. Set the glass front aside in
a safe location. See Figure 13.
2
1
Remove
Screw Here
Figure 12 Removing Front to Fireplace
