REV020620
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | (805) 640-6700 |
| 15 |
appropriate load bearing requirements. SimpliPhi Power is not liable for damage caused by inappropriate installation
mounting of brackets. Refer to Figures 2.0 and 3.0 for PHI Battery and mounting bracket dimensions and weights.
During mechanical testing, individual PHI 3.8 and PHI 2.9 Mounting Brackets were exposed to 200 pounds each of
downward pressure along the bra
cket’s outer edge. During this test, a deflection of approximately 30 thousandths of
an inch was measured. Bracket sets are designed to hold one PHI 3.8 Module with a weight of 78.24 pounds or one
PHI 2.9 Module with a weight of 61.06 pounds.
4.4
–
Dimensions and Weight
Table 2.0
–
Specifications: PHI 3.8 Battery & PHI 3.8 Battery w/ Mounting Bracket
PHI 3.8 Battery
PHI 3.8 Battery
w/ Mounting Bracket
Width
13.5’’
13.7” (18”
with mounting flanges)
Height
15.5’’ (including 1.5” terminal height)
15.75” (including 1.5” terminal height)
Depth
8”
9”
Weight 78.2 Pounds
86.2 pounds
Figure 2.0
–
PHI 3.8 Mounting Bracket Assembly
