REV020620
SimpliPhi Power, Inc. | 3100 Camino Del Sol | Oxnard, CA 93030, USA | (805) 640-6700 |
| 5 |
The PHI Battery Warranty does NOT cover product damage caused by mishandling or improper use per the
Installation Manual, Integration Guides and Warranty, exposure to liquids, impacts from falling objects or
being dropped, or attempts to repair the battery by any party other than SimpliPhi. The complete list of
Warranty Exclusions is included in the PHI Battery Warranty document:
https://simpliphipower.com/wp-
content/uploads/documentation/phi-series/simpliphi-power-phi-3-8-2-9-1-4-730-warranty.pdf
1.0
–
Introduction
1.1
–
Online Resources
The Product Documentation section of SimpliPhi’s web site (
https://simpliphipower.com/product-
) includes Specification Sheets
, Warranties, Installation & Operator’s Manuals, and
Integration Guides for all SimpliPhi’s current and legacy p
roducts.
SimpliPhi’s YouTube channel (
https://www.youtube.com/channel/UCcuCaLT_G3Hhumteh-pI5yg/videos
) has
instructional videos showing various steps of the battery installation process in detail.
1.2
–
Technical Support
SimpliPhi Technical Support (805-640-6700 x 1,
techsupport@simpliphipower.com
) is available to take any
questions regarding this manual or general installation questions. For assistance with battery system
commissioning, SimpliPhi asks that a commissioning call be scheduled ahead of time with Technical Support.
We encourage you or your installer to contact SimpliPhi with any questions. We are committed to working with
you and your installation team to achieve a safe, reliable storage system that will provide years of maintenance-
free service that is covered by our Warranty terms & conditions.
1.3
–
Product Overview
The PHI deep-cycle Lithium Ferro Phosphate (LFP) Battery is optimized with proprietary cell architecture,
power electronics, Battery Management System (BMS), manufacturing materials and processes. This assures
the highest grade and quality, longest cycle-life, greatest efficiency and freedom from material impurities,
toxicity and hazardous risk. The PHI Battery is modular, lightweight and scalable. It provides power security
and seamless integration of renewable and traditional sources of energy in conjunction with or independent of
the grid.
1.3.1
–
Battery Management System (BMS)
Each PHI Battery contains circuitry that protects the LFP cells from overcharge, over-discharge and
extreme load amperage. If pre-programmed BMS values are exceeded, the protective circuitry will
shut down the flow of electricity to/from the PHI Batteries. In some cases, this will result in the need
to re-set the BMS (see Section 6.0 - Troubleshooting of this Manual) and re-initialize an
inverter/charger. Often, inverter system settings will be saved within the inverter memory storage
and will not need to be reset. However, this is not an absolute standard but is common in most
inverter/chargers and should be anticipated if the PHI Batteries go into a state of self-protection and
shut down the flow of electricity. Refer to SimpliPhi’s Integration Guides for
inverter and/or charge
controller settings
https://simpliphipower.com/product-documentation/
