REV022618
SimpliPhi Power, Inc. | 420 Bryant Circle | Ojai, CA 93023, USA | (805) 640-6700 | info@simpliphipower.com |
SimpliPhiPower.com
| 7 |
Do not install in a confined space with machinery powered by flammable chemicals, or storage tanks,
fittings, or other connections between components of fuel or flammable chemical systems.
2.0 – Product Description
2.1 – Overview
The PHI 2.7 kWh 60 Amp deep-cycle Lithium Ferro Phosphate (LFP) Battery is optimized with proprietary
cell architecture, power electronics, BMS and assembly methods. It is modular, light-weight and scalable.
The PHI 2.7 Battery provides power security and seamless integration of renewable and traditional
sources of energy in conjunction with or independent of the grid: net zero, peak shaving, emergency
back-up, portable and mobile.
2.2 – Specifications
Please review Table 1.0 below for PHI 2.7 Battery specifications, including physical dimensions, Warranty
period, and technical data.
Table 1.0 - PHI 2.7 Battery Specifications
Notes:
•
1. Max operating conditions. Refer to Programming section.
•
Specifications are typical/nominal. Subject to change without notice.
•
There is less than 1% loss of energy during charging.
3.0 – Pre-Installation
The information within this section covers pre-installation procedures & considerations, namely, PHI 2.7
Battery performance parameters to be aware of during the design process, guidance on system sizing, as
well as mounting hardware and PHI 2.7 Battery weight.
