REV020918
SimpliPhi Power, Inc. | 420 Bryant Circle | Ojai, CA 93023, USA | (805) 640-6700 | info@simpliphipower.com |
SimpliPhiPower.com
| 10 |
ease of positioning (mounting hardware not included). A qualified installer should be familiar with
accomplishing this with the appropriate load bearing requirements.
For ease of measuring, arranging and mounting your PHI Battery array, a drawing of the PHI 3.5
Mounting Brackets with dimensions is provided (
Figure 4.0
).
During mechanical testing, individual PHI 3.5 Mounting Brackets were exposed to 200 pounds each of
downward pressure along the bracket’s outer edge. During this test, a deflection of approximately 30
thousandths of an inch was measured. Combined bracket sets can easily bear weights in excess of 400
pounds. Bracket sets are designed to hold one PHI 3.5 Module, with a weight of 77.5 pounds.
Section 2.5 – Battery Weight
PHI 3.5 Batteries weigh 77.5 pounds. The Wall Mount Bracket Assemblies weigh 8 Pounds. The
SimpliPhi Power Mounting Brackets should be mounted into load bearing beams, studs or solid materials
with appropriate fasteners. SimpliPhi Power is not liable for damage caused by inappropriate installation
mounting of brackets.
Section 2.6 – Battery Wall Mount + Bracket Dimensions
Table 2.0
–Specifications: Battery vs Battery W/ Mounting Bracket
PHI 3.5 Battery
PHI 3.5 Battery
w/ Mounting Bracket
Width
13.5’’
13.7”
Height
15.5’’ (including 1.5” terminal height)
15.5” (including 1.5” terminal height)
Depth
8”
9.16”
Weight
77.5 Pounds
85.5 pounds
