background image

SimpliPhi Power, Inc. | 420 Bryant Circle | Ojai, CA 93023, USA | +1 (805) 640-6700 | info@simpliphipower.com | 

SimpliPhiPower.com

| 25 |

SECTION 6 – ACCIDENTAL RELEASE MEASURES

The material contained within the batteries or cells is only expelled under abusive conditions. Use a shovel 
and cover battery with sand or vermiculite, place in an approved container and dispose in accordance with 
section 13.

SECTION 7 – HANDLING AND STORAGE

Handling: Do not expose battery or cell to extreme temperatures or fire. Do not disassemble, crush or 
puncture battery.

Storage: Insulate positive and negative terminals to avoid short circuit. Store in a cool and well - ventilated 
area and avoid direct sunlight. Elevated temperatures can result in reduced battery life.

SECTION 8 – EXPOSURE CONTROLS AND PERSONAL PROTECTION

Respiratory Protection: Not necessary under normal use. In case of battery or cell rupture, use a self- 
contained full-face respiratory mask.

Eye Protection: Not necessary under normal use. Wear safety goggles if handling a ruptured or leaking cell 
or battery pack.

Hand Protection: Not necessary under normal use. Wear rubber gloves when if handling a ruptured or 
leaking cell or battery pack.

Skin Protection: Not necessary under normal use. Wear rubber apron and rubber gloves if handling a 
ruptured or leaking cell or battery pack.

SECTION 9 – PHYSICAL AND CHEMICAL PROPERTIES

Physical State

 Solid 

Odor Type

Odorless

Appearance

Battery 

Odor Threshold

Not Applicable

pH

Not Applicable

Evaporative Rate

(n-Butyl Acetate = 1) Not Applicable

Relative Density

Not Applicable

Auto Ignition Temperature(C°)

Not Applicable

Boiling Point

Not Applicable

Flammability Limits (%)

Not Applicable

Melting Point

Not Applicable

Vapor Pressure

(mm Hg @ 20 C°) Not Applicable

Viscosity

Not Applicable

Vapor Density

(Air = 1) Not Applicable

Oxidizing Properties

Not Applicable

Solubility in Water

Insoluble

Flash Point and Method (C°)

Not Applicable

Water/ Oil distribution coefficient

Not Applicable

Summary of Contents for PHI2.6





























Reviews: