SimpliPhi Power, Inc. | 420 Bryant Circle | Ojai, CA 93023, USA | +1 (805) 640-6700 | info@simpliphipower.com |
SimpliPhiPower.com
| 8 |
Figure 2.0
-
PHI2.6™ 48 Volt, 2621 watt-hour (2.6kWh) Smart-Tech Batteries: Residential Installation
PHI SMART-TECH BATTERIES ARE DESIGNED FOR PARALLEL OPERATION ONLY - DO NOT ARRANGE
IN SERIES FOR INCREASED VOLTAGE
System Wiring Basics
Refer to published electrical wiring specifications and ratings. All wire should be an appropriate gauge and
construction to handle the loads that will be placed upon it. Heavy gauge, high strand copper wire is the
industry standard due to its stability, efficiency and overall quality. A qualified installer should understand
this and must adhere to the industry standard and published electrical guidelines.
For All Installations
• Maintain identical wire lengths from each PHI2.6™ Smart-Tech Battery terminal to the common bus.
• Use identical wire construction from each PHI2.6™ Smart-Tech Battery terminal to the common bus.
All PHI2.6™ Smart-Tech Batteries are outfitted with an 80A hydraulic/magnetic circuit breaker which will
show a white base when tripped. This breaker increases safety during installations and allows the battery
to effectively be turned “off” or “on.”
All PHI2.6™ Smart-Tech Batteries are designed to serve at a fixed voltage range in parallel arrangements for
maximum available amperage and storage capacity.
PHI2.6™ Smart-Tech Batteries are not
designed to be arranged in series for increased voltage. Series arrangements can result in damage to
the Smart-Tech Battery’s protective circuitry and
will void the Warranty.
