Getting Started DKIT-05
Landscape-Outdoor Lighting Kit
Simply Automated, Incorporated
6108 Avenida Encinas, Suite B, Carlsbad, CA 92011 USA
Technical Support:
www.simply-automated.com
or
800-630-9234
452-0001-0005WEB Rev. B Revised: September 22, 2011
11
Lamp Modules Relay Modules Dimmers
UML7 UML8 UMA25 UMA26
US1W9 US1W10
Tabletop Controllers
Deluxe Dimmers
Controlled Receptacles
(with 4 or 8-button scene control)
(with 4-button scene control)
(top receptacle controlled
bottom receptacle always on)
US2TP11 USQT22 US28OTP23
US2W12 US2W24
URD27
URD28
Important Note: only one of each pre-configured accessory model number can be ordered per home
installation.
Section 6: In Case of a Problem
Phone: 760-431-2100 Ext. 138 Monday-Friday 8AM-5PM (Pacific Time) for assistance, or write to
Support@Simply-Automated.com
.
Phase Coupler
: Your home should be no more than 2500 square feet and have only one breaker panel. A phase
coupler is required in some home installations; especially homes > 2500 square feet or homes with more than 1
breaker panel. If you have tested the scheduler for each relay module, but one or more of the relay modules do
not turn on, the circuits in your home may need phase coupling or phase alignment.
All homes have a 240V feed to the main breaker panel box, where the 240V is separated into 120V in two
phases, an A and B. You will need to install a phase coupler, or use devices on one phase (align or move lighting
circuits, at the breaker, that have these dimmers and modules to either phase A or B, not both), see
http://simply-
automated.com/products/cats/phase_couplers.php
for options.
Model #
Description
ZPCI-P30A
Plug-In Inverting Phase Coupler, fits a standard (NEMA 10-30) 240VAC / 30 Amp clothes
dryer type outlet
ZPCI-P50A
Plug-In Inverting Phase Coupler, fits a standard (NEMA 10-50) 240VAC / 50Amp clothes
dryer type outlet
ZPCI-W
Wire-in Inverting Phase Coupler
ZPCI-B
Breaker Panel Inverting Phase Coupler
