070-117
070-118
070-119
070-120
TM Patio Lockset
www.
simply
elegant
products
.com
2
INSTRUCTIONS
(Page 2 of 3)
• The deadbolt is adjustable. It is set for 2 3/8” set back,
but can be adjusted to 2 3/4”. (See the instruction sheet,
“Adjustable Deadbolt & Latch.”)
• The #3
ADJUSTABLE DEADBOLT
is marked with an up
arrow on the side.
• Insert the deadbolt in the up position into the top hole on
the end of the door. Screw in place using #13
1/2” WOOD
SCREWS
(two).
• Insert #1
OUTSIDE KEY CYLINDER
into #2
KEY CYLINDER
PLATE
then slide the key cylinder arm through the deadbolt
where the cross slot is located.
• Hold in place while putting #4
THUMB TURN MOUNTING
PLATE
on the inside. Now insert and tighten #5
2” PAN
HEAD SCREWS
(two). Next place #6
THUMB TURN AND
COVER PLATE
into the #4
THUMB TURN MOUNTING
PLATE
and tighten with #7
1/2” OVAL HEAD SCREWS
(two).
DEADBOLT INSTALLATION
• The latch is adjustable. It is set for 2 3/8” set back, but the
latch can be adjusted to 2 3/4” set back. (See instruction
“Adjustable Deadbolt & Latch.”)
• The #9
ADJUSTABLE SPRING LATCH
should be oriented so
that the beveled latch faces in the direction that the door
closes. With the orientation in the direction of closing, place
the latch in the bottom hole on the end of the door. Screw
in place using #13
1/2” WOOD SCREWS
(two).
LATCH INSTALLATION
1
2
3
4
5
6
7
13
DIRECTION DOOR
CLOSES
