STEP 4
Untwist and straighten the wire conductors. We recommend using the Simply45
Adjustable LAN Cable Stripper (
S45-S01BL/YL
) that has a wire straightener comb on
the top. Next, align the wires in the correct alignment pattern (Type A or B).
The B pattern is the most used today.
T568A
GR BL
T568B
WO WG WBL WBR
WG
TOP ROW
BOTTOM ROW
WO WBL WBR
STEP 5
Using the
S45-801
Flush Cutter, trim
the solid wires back about 3/4” (2cm).
STEP 6
Following the pattern above, insert
the 4 striped wires first. Make sure the
wires are fully laid into the load bar.
Then insert the 4 solid wires
