2.
Operating Instructions
Before the machine is used for the first time, a site-specific Hazard and Risk Assessment
should be completed as per
2.1
Before operation
Before operating a Dumpmaster, check the following points to ensure that the machine is
stable and safe to use:
1.
The machine is on firm ground, with a slope ratio less than 1:12.
2.
All covers and safety guards are in place.
3.
The wheel brakes are applied, and/or the feet are wound down onto the ground.
4.
All personnel other than the operator are well clear of the machine.
5.
The cradle is fully lowered.
6.
The key is inserted and turned to the ON position.
7.
The battery indicator (if fitted) shows an acceptable level of charge.
2.2
Emplacing and removing bins
The Dumpmaster cradle is designed to allow bins to be emplaced and removed easily, while
also holding them securely throughout the tipping cycle.
It is important to understand how to correctly place bins onto the cradle, as improper
placement may result in bins falling out of the machine when inverted.
2.2.1
Cradle identification
A range of different cradles may be fitted to the Dumpmaster, depending on the bins it will
be emptying. Use the following table to identify the correct instructions for your machine.
Cradle Type Primary Usage
Bin Compatibility
Cradle Image
Refer
Type-E
(EN840
base-lift
cradle)
General waste
and recycling
applications
EN840 mobile
garbage bins
(wheelie bins)
-
60L
-
80L
-
120L
-
140L
-
240L
Summary of Contents for DUMPMASTER DM0700
Page 1: ...User Manual Simpro Dumpmaster Original Instructions English v119 0 October 2022 USER MANUAL...
Page 53: ...User Manual Simpro Dumpmaster Original Instructions English v119 0 October 2022 Page 52...
Page 58: ......
Page 59: ...User Manual Simpro Dumpmaster Original Instructions English v119 0 October 2022 Page 58...
