3.
Open the safety door and carry out cleaning or maintenance as required.
4.
Once the work is complete, shut the safety door and turn
both
interlock cams back to
the LOCK position.
5.
Remove the Override Key and
store in a safe location
.
6.
Fully test the machine and all safety functions before returning to service. If the
machine is fitted with a PLd or PLe safety-monitored control system, press the blue
RESET button for two seconds to test and reset the safety functions.
Do not open the safety door with the Override Key inserted in an interlock cam but not
fully turned (less than 90°) as this may damage the interlock.
Do not apply excessive force to the Override Key or interlock components.
Do not leave the Override Key inserted in an interlock during normal operations.
