background image

19 -  ENG

LIMITED WARRANTY

90 DAY LIMITED WARRANTY ON pRODUCT COMpONENTS EXCLUDING pUMp

SIMPSON

®

 

warrants to the original purchaser that the wheels, gun, hose, wand, spray 

nozzle(s) and other components of the 

SIMPSON

®

 

pressure washer covered under this 

warranty are free from defects in material and workmanship for 90 days from the date 

of purchase.

ONE YEAR LIMITED WARRANTY ON pUMp AND FRAME

SIMPSON

® 

warrants to the original purchaser that the pump of the 

SIMPSON

®  

pressure washer covered under this warranty is free from manufacturer’s defects in 

material and workmanship for one year from the date of purchase. The one year limited 

warranty applies to the pump only.

SIMPSON

® 

will repair or replace, at 

SIMPSON

®

's option, products or components 

which have failed within the above warranty periods. Service will be scheduled 

according to the normal work flow and business hours at the service center location, 
and the availability of replacement parts. All decisions of 

SIMPSON

®

 

with regard to this 

limited warranty shall be final.
This warranty gives you specific legal rights, and you may also have other rights which 

vary from state to state.

ENGINE WARRANTY

The engine warranty is covered under the terms and conditions as outlined by the 

engine manufacture’s warranty contained herein and is sole responsibility of the engine 

manufacturer.

RESpONSIBILITY OF ORIGINAL pURCHASER (INITIAL USER):

• 

To  process  a  warranty  claim  on  your 

SIMPSON

®

 

pressure washer, report the 

concern to 

www.simpsoncleaning.com

 for authorization and direction to the 

nearest authorized service centre in your area.

• 

Retain original cash register sales receipt as proof of purchase for warranty work.

• 

Use reasonable care in the operation and maintenance of the product as described 

in the Owners Manual(s).

THIS WARRANTY DOES NOT COvER:

• 

Merchandise sold as reconditioned, used as rental equipment, or floor or display 

models.

• 

Merchandise that has become damaged or inoperative because of ordinary wear, 

misuse, cold, heat, rain, excessive humidity, water quality, freeze damage, use 

of improper chemicals, negligence, accident, failure to operate the product in 

accordance with the instructions provided in the Owners Manual(s) supplied with 

the product, improper maintenance, the use of accessories or attachments not 
recommended by 

SIMPSON

®

 

, or unauthorized repair or alterations.

• 

Repair and transportation costs of merchandise determined not to be defective.

• 

Damage due to chemical deterioration, scale build up, rust, corrosion or thermal 

expansion

• 

Costs associated with assembly, required oil, adjustments or other installation and 

start-up costs.

• 

Expendable parts or accessories supplied with the product which are expected to 

become inoperative or unusable after a reasonable period of use, including but not 

limited to springs, nozzles, o-rings, washers, and similar accessories.

 
 

Please contact us for further information at www.allpartsinc.com

 
 

Summary of Contents for MS60772
























Reviews: