Simpson MSH3125 Instruction Manual Download

Page: 18 / 21

18- ENG

ACCESSORIES

DANGER: Risk of fluid injection. When using replacement lances or guns

with this pressure washer, DO NOT use a lance and/or lance/gun combination

that is shorter in length than what was provided with this pressure washer as

measured from the nozzle end of the lance to the gun trigger.
NOTIcE:

The use of any other accessory not recommended for use with this tool

could be hazardous. Use only accessories rated equal to or greater than the rating

of the pressure washer.

SpECIFICATIONS

Model

mSh3125

PSI Max*

3100 psi

GPM Max*

2.5 gpm

High Pressure Hose

25 ft. (7.6 m)

Presure of Inlet Water

20–100 psi

Inlet Water

cold tap

Soap Consumption Rate

10% max

* Water flow and maximum pressure ratings determined in accordance with

PWMA standard PW101.

In our effort towards Continuous Improvement, specifications are subject to

change without notice.

SERvICE INFORMATION

Do not return this product to your retailer.

Please contact our customer service

department at www.simpsoncleaning.com.

LIMITED WARRANTY

90 DAY LIMITED WARRANTY ON pRODUCT COMpONENTS EXCLUDING pUMp

SIMPSON

warrants to the original purchaser that the wheels, gun, hose, wand, spray

nozzle(s) and other components of the

SIMPSON

pressure washer covered under this

warranty are free from defects in material and workmanship for 90 days from the date

of purchase.

ONE YEAR LIMITED WARRANTY ON pUMp AND FRAME

SIMPSON

warrants to the original purchaser that the pump of the

SIMPSON

pressure washer covered under this warranty is free from manufacturer’s defects in

material and workmanship for one year from the date of purchase. The one year limited

warranty applies to the pump only.

SIMPSON

will repair or replace, at

SIMPSON

's option, products or components

which have failed within the above warranty periods. Service will be scheduled

according to the normal work flow and business hours at the service center location,
and the availability of replacement parts. All decisions of

SIMPSON

with regard to this

limited warranty shall be final.
This warranty gives you specific legal rights, and you may also have other rights which

vary from state to state.

Summary of Contents for MSH3125






















Search results

Summary of Contents for MSH3125

Reviews:

Related manuals for MSH3125

Brands by name

Popular brands

Simpson MSH3125, Instruction Manual

Search results

Summary of Contents for MSH3125

Reviews:

Related manuals for MSH3125

Brands by name

Popular brands