Installation Guide
Read the entire manual thoroughly before beginning your installation. Take
note of the safety tips and follow all steps to ensure your system is installed
correctly before use. Installation needs to comply with state and local laws and
regulations; you must check and comply with all local plumbing codes. Warning:
Massachusetts, USA, require installation by a licensed plumber and does not
permit the use of saddle valves. (plumbing code 248-CMR of the Commonwealth
of Massachusetts)
Hand tools required
Essential hand tools are required to install the SimPure
®
T1-400 RO water
purification system. An electric drill, drill bits up to ½" (12.5mm), Adjustable
wrench, tube cutters (or knife), cross-head screwdriver (Phillips).
Plan your Installation
Your SimPure
®
T1-400 Water Purifier can be installed under a sink or in a
remote location. Typical remote sites include a laundry room or utility room.
Review the location options below and determine where you are going to install
your system.
Option 1: Under-sink.
The unit can be installed in a kitchen or bathroom
sink cabinet. A suitable drain point is required for drain water from the
Reverse Osmosis system.
Option 2: Remote Interior
. The unit may also be installed in a remote
interior location away from the RO Faucet. You will need a nearby feed
water source and drain point connection.
9
Check Location and Space Requirements
Determine and check the size and position of the T1-400 for proper installation
into the chosen space and remember to leave enough room around the System
for changing filters and maintenance.
Installation Steps
Step 1 - Install the T1-400 Assembly
Take out the filter cartridges.
Remove the protective film and pull
out the protective cover.
Install the filter cartridges.
According to the mark on the main
body, insert the corresponding filter
cartridge into the main body first, and
then screw it tightly.
Install the PP, CTO, RO and T33 filter
cartridges in sequence.
Warning:
Refer to the markings to
ensure that each filter cartridge is
installed in the correct location.
10