Page 9
16 -Channel 16 / Personal Channel (10)
Press to select channel 16.
• Press and hold until double beep to select
personal channel (display shows
)
• Press and hold for three beeps to set select-
ed channel as the personal channel.
- Backlight (11)
Press to turn on and off. Use /
to adjust
the backlighting level (5 levels available). The
bargraph indicates the backlighting level.
• The battery save function turns the back-
lighting off if no key is pressed after 20 sec-
onds. Press any key (except
or ) to turn
light on again.
2.2 Selecting Alternative Channel Sets
In countries where it is permitted, holding
VOL
down while turning the radio on will
enable the radio to operate on a secondary
set of channels (Fig 2.3).
Where the display will normally show INT
(International channel set) on the bottom line,
this will show USA for USA channels, CAN
for Canadian channels etc.
• Channel sets available will depend on
which country the radio is programmed for
use in. This function will only be available if per-
mitted in the country of purchase. Please enquire
with your national licensing authority for
details of permitted channel sets.
• The radio will revert to International chan-
nels if it is switched off then on again.
2.3 Disable / Enable Key Beep
The HT50 beeps every time a key is pressed to
confirm operation. To disable key beep, press
and hold
SQ
while turning the set on. Repeat
this procedure to turn the key beep on again.
• Second level functions (such as All Channel
Scan, Triwatch etc) will still be indicated by a
beep, even if the key beep is disabled.
KEEP VOL HELD DOWN
Fig 2.3 - Selecting alternative channel set
offerd by www.Busse-Yachtshop.de email: info@busse-yachtshop.de