Step 3 -
Mount your BoatConnect hub
Installation
Mount the BoatConnect hub horizontally. This is the best
orientation for the internal cellular and GPS antennas.
Mounting vertically will result in poor GPS reception and
poor vessel tracking performance.
Option A -
Mount BoatConnect with
adhesive Dual Lock
™
(no drilling
required)
1.
Clean both the wall and the mounting bracket using
the alcohol wipes provided and allow to dry properly.
2.
Stick the 3M Dual Lock strips of the fastener same
type to the vertical surface / wall.
and
stick the other fastener type to the bracket.
3.
Attach the bracket and the hub to the wall by joining
the two types of 3M Dual Lock fasteners together.
Option B -
Mount BoatConnect
with screws requires drilling
1.
Drill pilot holes in the vertical surface or wall and
then attach the bracket using the two stainless steel
cross-head screws provided, ensuring they are
placed diagonally apart in the bracket’s holes for
maximum stability.
1.
Connect the BoatConnect hub to the bracket using
the two 3/8” Philips truss head screws provided and
mount the bracket with the BoatConnect hub attached
horizontally
to a vertical surface or wall so that the top
label of the hub is facing upwards.
BoatConnect
|
Installation Guide
5
