16 |
Getting ready to use the system |
E5024 ECDIS Installation Manual
Getting ready to use the system
Installing the charts from the NavStick
The E5024 system is delivered with a pre-installed overview chart. Detailed world-wide charts
are available on the NavStick USB drive included with the system. The charts are installed and
maintained by using the following services:
•
NavTracker - a customized web interface from NAVTOR giving the navigator and ship
management full overview of chart usage, chart update history and chart management. The
customized NavTracker web interface is created and log-on details submitted to the user
when the charts are purchased
•
NavSync - a PC program from NAVTOR used for receiving and updating the content on the
NavStick
The system allows for installing and using charts in S57 and S63 format from other chart
suppliers. Refer to
“Installing charts from other suppliers” on page 18.
Before the charts can be copied from the NavStick to the E5024 system the following steps
must be performed:
1.
Submit the User permit code to Navico
2.
Verify your chart subscription from the NavTracker web site
3.
Update the content of the NavStick to include chart updates and Chart permit codes
4.
Copy content of the NavStick to the E5024 system
¼
Note:
Step 1 is usually done in the office. The other steps are done when the system is in-
stalled and ready for configuration.
The next sections describe the required steps in detail.
Submitting the User permit code to Navico
A license code has to be obtained from Navico before the charts can be installed from the
NavStick. To obtain this code the system’s User permit code must be submitted to Navico.
The system’s User permit code is automatically generated in the E5000 computer. If the E5000
is replaced, a new User permit code has to be submitted to Navico to be able to use the
charts.
Insert a card in the SD card slot or a memory stick in the USB port on the E5000, and save the
User permit code from the System Settings dialog. This code is sent to Navico by email at
chartservice@navico.com.
¼
Note:
You can NOT save the User permit code to the NavStick.
4
Summary of Contents for E5024 ECDIS
Page 1: ...ENGLISH E5024ECDISSystem Installation Manual...
Page 2: ......
Page 42: ......
Page 43: ...988 10788 001...
