| 31
ECDIS Software setup |
E5024 ECDIS Installation Manual
•
Select a method to calculate the length of the grounding check zone in the methods drop-
down list and enter a value to the value field. The following methods are available:
•
Prediction time
– the zone length is calculated based on the predicted position of
the own vessel after a specified period of time
•
Safety distance
– the zone length is calculated based on the specified distance
Select a shape for the grounding check zone in the
Guard zone shape
drop-down list. The
shapes available are:
Cardioid
and
Sector
.
•
If the
Sector
shape is selected, specify the angle of the sector in the
Zone angle
field
•
To display the zone on the chart, tick on the
Show on chart
check box. To hide the zone, tick
off the
Show on chart
check box
¼
Note:
If the guard zone display is on, dangerous objects inside the zone are marked with red,
and caution objects are marked with yellow. If the guard zone display is off, objects are not
marked.
Lost AIS target alarm
ECDIS triggers a visible and audible warning in case an AIS target is lost. When the
Lost AIS
target alarm
is ticked on, the system alerts you if any AIS targets are lost within the range
specified. Any targets lost outside the specified range will not trigger an alarm.
You can select to turn off this alarm filter.
To turn
On
/
Off
the lost AIS target alarm:
Open the alarms panel by accessing the
Menu
, then
Settings
, and
Alarms
.
•
To turn the alarm off, tick off the
Lost AIS target
alarm
check box. When the alarm is
off, an indication is displayed in the chart view
•
To turn the alarm on, tick on the
Lost AIS target
alarm
check box. The indication is
removed from the chart view
Summary of Contents for E5024 ECDIS
Page 1: ...ENGLISH E5024ECDISSystem Installation Manual...
Page 2: ......
Page 42: ......
Page 43: ...988 10788 001...
