background image

| 5

Basic Operation | 

IS40 PRO Operator Manual

Turning the IS40 PRO on and off

The IS40 PRO has no 

Power

 key, and it will be running as long as 

the power is connected.

Display Lighting

Press and hold the 

Enter

 key for 3 seconds to display the Display 

Setup dialog. 
The Lighting Level option is active by default, and you need to press 
the 

Enter 

key to select the other options in the dialog.

1. 

Use the 

Arrow

 keys to select an option.

2. 

Press the 

Enter

 key to confirm the selection. The frame around the option 

is red by default and will turn green when selected to adjust values.

3. 

Use the 

Arrow

 keys to adjust the value.

4. 

Confirm the selection by pressing the 

Enter

 key.

Lighting zone

Set the lighting zone for the display. All units in the selected 
Lighting Zone will mirror each others light settings. Default setting 
is Network.

Night mode

Change the display to Night Mode color pallet. All displays in the 
selected Lighting Zone will also change to Night Mode.

Lighting level

Adjust the backlight level from 0-10.

 

¼

Note: 

When set to level 0, the display backlight will be off and keys 

backlight will be at a minimum. 
When the IS40 PRO is powered on, the Lighting level will be as set 
before the unit was powered off. The Night Mode option will be on 
if it was enabled when the unit was powered off.

Standby

Turns off the backlight for keys and display. Press any key to return 
to normal operation.

Summary of Contents for IS40 PRO

































Reviews: