| 21
Configuration |
Loop M User Manual
Configuration
!
Warning:
The Loop system must only be configured by a competent
installer. If your Loop system has not been preconfigured for you, please
contact your dealer for advice on how to have the Loop system configured
by a competent installer.
¼
Note:
It is recommended to save a copy of the configuration file to a USB stick and then kept
on board the vessel. In the unlikely event of hardware failure, this saved configuration file can
be loaded into the replacement hardware to restore full functionality.
¼
Note:
Navico takes no responsibility for the correct setup and availability of the configuration
file created by the boat builder and/or installing dealer. Safe storage and retrieval of this
unique file is the responsibility of the boat builder and/or installing dealer. It is important to
make a copy of this configuration file, for example on a USB stick, and store in a safe location
for future use.
Before the Loop system can be operated from the MFD, it has to be configured. The web
based Loop Set App is used to generate the configuration files and can be downloaded from
one of the three brand websites: www.lowrance.com, www.bandg.com,
www.simrad-yachting.com
Requirements
•
A storage device that fits the MFD.
•
USB memory stick.
•
USB A Female to Mini USB B Male OTG adapter cable.
•
MAC or PC with a web browser (Google Chrome, Mozilla Firefox, Safari or Microsoft Edge 11+)
installed.
Configuring
Locate the SetApp.html file and select it. The configurator will open in your web browser.
3
