Basic operation
Turning the unit on and off
Enter a short description of your concept here (optional).
You turn the unit on and off by pressing and holding the
Power
key.
If the key is released before the shut-down is completed, the power off process is cancelled.
You can also turn the unit off from the System controls dialog, activated by a short press on
the
Power
key.
Ú
Note:
The System Controls dialog will not display the power off option when the unit is
configured as slave. Refer details in the NSS evo2 Installation manual.
First time startup
The first time the unit is started and after a master reset the system will run through an
automatic start-up sequence, including language setup and automatic data source selection.
You can select to interrupt this sequence and later configure the system yourself.
Standby mode
In Standby mode the sonar is set to standby, and the backlight for screen and keys are turned
off to save power. The system will continue to run in the background.
You select Standby mode from the System Controls dialog.
Switch from Standby mode to normal operation by a short press on the
Power
key.
Display illumination
Enter a short description of your concept here (optional).
The display backlighting can be adjusted at any time from the System control dialog.
A night mode which optimizes the color palette for low light conditions, is included.
Ú
Note:
Details on the chart may be less visible when the Night mode is selected!
Locking the touch screen
Enter a short description of your concept here (optional).
You can temporarily lock the touch screen to prevent accidental operation of the system.
This feature is also useful when cleaning the screen while the unit is turned on.
When the touch lock is active you can only operate the units from the keys.
The touch screen operation is locked from the System control dialog.
You remove the lock function by a short press on the
Power
key.
2
14
Basic operation
| NSS evo2 Operator Manual
Summary of Contents for NSS evo2
Page 1: ...ENGLISH NSSevo2 Operator Manual simrad yachting com ...
Page 2: ......
Page 99: ......
Page 100: ...0980 988 10592 001 ...