Edit a route from the chart panel
1.
Tap the route to make it active
2.
Select the route edit option in the menu
3.
Tap the panel to add a new routepoint
- If you tap on a leg a new point will be added between existing routepoints
- If you tap outside the route the new routepoint will be added after the last point in the
route
4.
Drag a routepoint to move it to a new position
5.
Save the route by selecting the save option in the menu.
Ú
Note:
The menu will change depending on the selected edit option. All edits are confirmed or
cancelled from the menu.
The Edit Route dialog
You can add and remove routepoints from the
Edit Route
dialog. This dialog is activated by
tapping an active route's pop-up, by pressing the rotary knob, or from the menu.
The dialog can also be accessed by using the
Routes
tool on the Home page.
Tracks
A track is a graphical presentation of the historical path of the vessel, allowing you to retrace
where you have travelled. A track can be converted to a route from the Edit Tracks dialog.
From the factory, the system is set to automatically track and draw the vessel's movement on
the chart panel. The system will continue to record the track until the track length reaches
the maximum track points, and will then automatically begin overwriting the oldest track
points.
The automatic tracking function can be turned off from the Tracks dialog.
Creating a new track
You can start a new track from the Tracks dialog, activated by using the Tracks tool on the
Home page.
Waypoints, routes and tracks
| NSS evo2 Operator Manual
31
Summary of Contents for NSS evo2
Page 1: ...ENGLISH NSSevo2 Operator Manual simrad yachting com ...
Page 2: ......
Page 99: ......
Page 100: ...0980 988 10592 001 ...
