Navigating
The navigation function included in the NSS evo2 allows you to navigate towards the cursor
position, towards a waypoint or along a predefined route.
If autopilot functionality is included in your system, the autopilot can be set to automatically
navigate the vessel.
For information about positioning waypoints and creating routes, refer to
"Waypoints-Routes-
Tracks"
on page 29.
Navigation panels
The Nav and Position panels can be used to display information when you are navigating.
The Nav panel
The Nav panel is activated from the Home page, either as a full page panel or as part of a
multiple panel page.
Key
Description
1
Name of destination point
2
Vessel heading
3
Bearing to waypoint
4
Destination point
5
Bearing line with allowed off course limit
When travelling on a route the bearing line shows the intended course from one
waypoint towards the next. When navigating towards a waypoint (cursor position,
MOB or an entered lat/lon position), the bearing line will show the intended course
from the point at which navigation was started towards the waypoint.
6
Vessel symbol
Indicates distance and bearing relative to the intended course.
If the XTE (Cross Track Error) exceeds the defined XTE limit, this will be indicated
with a red arrow including the distance from the track line. Refer to
"XTE limit"
on
page 36
5
Navigating
| NSS evo2 Operator Manual
33
Summary of Contents for NSS evo2
Page 1: ...ENGLISH NSSevo2 Operator Manual simrad yachting com ...
Page 2: ......
Page 99: ......
Page 100: ...0980 988 10592 001 ...