Start-up procedures
99
851-164300 / C
b
Press the
Horizontal
tab to bring up this menu.
c
Press the
Gain H-
and
Gain H+
buttons repeatedly (field
4 on the Operating Panel).
d
Check that the
Gain
readout in the menu and on the top
of the tilt indicator changes from 0 to 50.
8
Check the
Horizontal range
readout.
a
Press the
Range H-
and
Range H+
buttons repeatedly
(field 5 on the Operating Panel)
b
Check that the
Range
readout in the menu and on the top
of the tilt indicator changes accordingly.
Vertical gain and range
9
Check the
Vertical gain
readout.
a
Press the
Vertical
tab to bring up this menu.
b
Press the
Gain V-
and
Gain V+
buttons repeatedly (field
4 on the Operating Panel).
c
Check that the
Gain
readout in vertical the menu can be
changed from 0 to 50.
10
Check the
Vertical range
readout.
a
Press the
Range V-
and
Range V+
buttons repeatedly.
b
Check that the
Range
readout in the
Vertical
menu
changes corresponding the horizontal ranges.
Full screen
11
Check the
Full screen
function.
a
Press the
Menu
button (field 6, left button)
b
Check that the menu disappears for a Full Screen echo
presentation.
c
Press the button once again to recall the menu.
View menu
12
Check the
View
menu.
a
Move the cursor to any position inside the echo area.
b
Press the
View
button (field 6).
c
Check that the
View
menu appears. (Note that this menu
must be regarded as an object menu, and it appears next
to the cursor in the echo field.)
d
Press the
Select
button again to remove the menu.
Summary of Contents for SH80 - REV C
